D10CC150UVT-F

D10CC150UVT-F LED Programmable Driver

D530C150HVT-F20KC

D530C150HVT-F20KC Programmable LED Driver

D14CC150UVT-F

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

  • Input Power 165W /120V 161W/277V
  • Input Voltage 120 ~ 277 Vac
  • Input Current 1.40 /120V 0.59/277V
  • Output Voltage 38V-107V
  • Output Current 140-1400mA
  • Output Power 150W Max
$48.67
SKU
D14CC150UVT-F20KC
Have a Question, we love helping customers!
Call now to speak with a lighting specialist.
1.866.842.5512

D14CC150UVT-F - LED Driver 1400 mA, 150W, 120-277V input, 0-10V dimming, w/tuning

1400mA LED Driver w/ Tuning

Universal input voltage 120 – 277 Vac
0-10V Dimming
Thermal Foldback Control

Programmable Tuned Output Settings
• This Everline LED Driver can be configured
to set its current output to a selected
fraction of their maximum rated design
level. This function is called tuning (or also
high-end trim) and it can be implemented
with the LDTC01A using the Selector rotary
switches. Tuning assignments are stored in
driver memory and are not lost when power
is removed. All factory produced drivers are
tuned to maximum output unless otherwise
noted on the label.
• Tuning SET Levels are listed in the table to
the right. The SET Level corresponds to an
associated Output Current value.
• Tuned output tolerance of ± 5%.
• Refer to application note EVD06.

0-10V Analog Dimming Interface
• Analog 0 to 10 vDC Voltage Control
• Use Violet (+) & Gray (-) for connection to 0-10vDC.
• 10v = maximum output, 0v = minimum output
• Wiring Violet & Gray together provides min. light output.
• Capping Violet & Gray separately provides 100% light output.
• 0-10V interface can be wired as Class 1 or Class 2 Circuit.
• Driver will source a maximum of 200uA for control needs.
• Controller must sink current from the 0-10V control leads.

More Information
Specifications

D14CC150UVT-F Spec Sheet

Input Voltage 120-277
Output Power 150
Output Voltage 38 - 107 Volt
Output Current 140 - 1400
Order Code D14CC150UVT-F
Manufacturer Universal Lighting Technologies