CF94 (Replaced with CF94GU)
Features Free Shipping for this item •UL COMPONENT RECOGNIZED : Factory Installation Only •Illumination Time : 90 Minutes •Initial Light Output : 300 - 750 Lumens •Full Warranty : 2 Years (NOT pro-rata) •Dual Input Voltage : 120/277 VAC, 60 Hz •AC Input Current : 280 mA
Open circuit design; One- or two-lamp emergency illumination for 4-pin fluorescent lamps (without integral starter); End-of-lamp-life compatible. APPLICATION The CF94 open circuit design is a UL RECOGNIZED COMPONENT that works in conjunction with an AC ballast to convert fluorescent fixtures into emergency lighting. The open circuit design consists of a high-temperature nickel-cadmium battery (available in two configurations for ease of installation), charger and electronic circuitry on one open circuit board. A single-pole push-button test switch and LED charging indicator light are also provided. The CF94 can be used with one 13 - 42 W or two 13 - 39 W (4-pin) twin, quad or triple twin-tube compacts. It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts. OPERATION When AC power fails, the CF94 immediately switches to the emergency mode, operating one or two lamps at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the CF94 automatically returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp-life shutdown circuits.